China 08b14t Double Sprocket sprocket bike shop

Warranty: 1 calendar year
Relevant Industries: Machinery Mend Retailers, Farms
Custom-made assist: OEM
Materials: Steel, C45, 40Cr, 20CrMnTi, 16MnCr5, 16CrNi4 etc.
Regular: ANSI, DIN, ISO and so on.
Identify: Sprocket
Color: Cyan, green, blue, black, purple, yellow and so on.
Generation: According to the drawings or samples
Surface area Treatment: Black end, bluing, galvanized, portray, sand blasting etc.
Heat Treatment: High frequency quenching, tempering, carburizing, carbonitriding and so on.
Hardness: Over 45HRC, according to the client’s prerequisite
Inspection: Vernier caliper, Rockwell hardness tester, Beat Gear Tester and many others.
Rust Protection: Cleaning rust-evidence oil, sealed packaging
Fabrication: Accept the welding and other method if the consumers call for
Packaging Specifics: Plastic bag+ wood situation or in accordance to the client’s requirment.
Port: ZheJiang , HangZhou, ZheJiang and many others.

Merchandise Present

MaterialC45,minimal carbon steel,40Cr, 20CrMnTi,16MnCr5, 42CrMo,stainless steel,copper and many others, or according to your necessity.
GenerationIn accordance to the drawings or samples.
Manufacturing methodForging, casting, welding and other procedure if the clients demand.
EquipmentsCNC Band Sawing Machine, CNC Lathe, Milling and Drilling Machine, Gear Hobbing Equipment, Coupling Maker TS4C-32-1112 Clamp sort parallel coupling for servo motor hook up versatile shaft coupling sizzling sale Gear Shaping Equipment ,Gear Grinding Machine. Warmth Treatment method Device.
Warmth Treatment methodHigh Frequency Quenching , Tempering, Carburizing, Carbonitriding .
Floor TherapyGalvanized , Black End, Bluing, Paint, Sand Blasting .
InspectionVernier caliper, Rockwell hardness tester, Beat Gear tester and so on.
Method 1st We need to have to lower the metal so that they can reach the need of the clients.
SecondDistinct substance and form can be produced by CNC Machining.
ThirdWe can do the approach of milling keyway and drilling holes as your necessity. FourthWe have equipment hobbing device, equipment shaping machine and gear grinding equipment. We can procedure the enamel accroding to the diverse specification.
FifthIf the clientele have hardness requirement in teeth, we can do the higher-frequency quenching in teeth.
SixthFollowing finishing creation, we can test the hardness to make sure it can fulfill the requirement on the drawings.
Packing & Delivery Packing: Plastic bag + wooden case, or according to the client’s requirment.Delivery: by sea, by air, by intercontinental convey this kind of as DHL, UPS, FedEx, EMS and so on.
Firm Info ZheJiang CZPT Equipment Manufacture Co.,Ltd. was launched in the calendar year 2003, But in fact, we have much more than 30 years experience in creating and manufacturing merchandise. We have a rigorous method flow. We are outfitted with specialist technological personnel and innovative testing instruments, Alibaba’s eighth calendar year member. Common & Tyre Coupling LA5 variety versatile shaft connector High Good quality torque transmission natural rubber 45# steel non-lubricating non-standard & personalized design and style appropriate. Since the nineteen nineties, we commenced to export Europe, The united states, Germany and other international locations and locations. Win a very good popularity at home and overseas.
Adhering to the “moderate, pargmatic, intergrity, efficient” business philosophy, we welcome buyers all of the entire world collectively for a better tomorrow.
Office Developing
WORKSHOP
Generating
Producing
WAREHOUSE
OUR Team
Buyer Checking out The Russian Federation’s buyer frequented in November 2011
The United States’s customer visited in June 2012
The Germany’s customer visited in Might 2014
The United Kingdom’s customer frequented in June 2016
Exhibition Automechanika ZheJiang
AAPEX
2015 Germany AGRITECHNICA
FAQ1 Q: What are your company’s principal goods? A: We create transmission components and some mechanical equipments. And we can also supply other excellent merchandise for our clientele in China. (1) Transmission Components: sprocket, gear, splined shaft, rack, bushing, timing chain package and so on. We have a lot more than 200 versions timing sprockets. And we have much encounter in making the agricultural sprockets. (2) Mechanical Equipments: check sieve, vibrating monitor, conveyor, bucket elevator and so forth. (3) Others: all the merchandise in China.2 Q: What is your principal marketplace? A: Our primary markets are in Asia, Europe and The us. But we also preserve close eyes on Africa and Australia. We will make our merchandise advertising to all of the entire world.3 Q: How extended is the usual delivery time? A: Normally talking, it is about 1 month for the transmission elements, and 3~fifteen workdays for the vibrating display screen & High Quality UL13 tyre shaft coupling Rubber aspect forty five# metal hub straightforward construction fenaflex tyre coupling Manufacturing facility Price conveyor machine.

sprocket

What is a sprocket?

A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.

ISO sprocket uniformity

ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.

metal sprocket

Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.
sprocket

plastic sprocket

Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.
sprocket

Aluminum sprocket

Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
China 08b14t Double Sprocket     sprocket bike shopChina 08b14t Double Sprocket     sprocket bike shop
editor by CX 2023-04-23

Metric Sprockets

As one of the metric sprocket manufacturers, suppliers, and exporters of mechanical products, We offer metric sprockets and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of metric sprockets.

Recent Posts