Product Description

Product Description

2BE1 series water ring vacuum pump is a substantial-efficiency and energy-saving solution investigated and designed by our organization in blend with the sophisticated technologies of imported merchandise. This sequence of vacuum pump is a single equipment single motion composition, which has the advantages of simple construction, convenient servicing, reliable operation, large effectiveness and power preserving. It is typically utilised to suck air or other gases that are insoluble in water, free of reliable particles and corrosive, so as to form a specified vacuum in a closed container. Outfitted with explosion-proof motor, which can suck flammable and explosive gases. The pump physique is produced of corrosion-resistant materials or unique resources soon after corrosion-resistant therapy, which can pump corrosive gases to a certain extent.

2BE1 sequence water ring vacuum pumps are commonly utilized in petrochemical, light-weight sector, chemical business, pharmaceutical, papermaking, metallurgy, developing materials, electrical appliances, foods, coal washing, mineral processing, chemical fertilizer and other industries

Our Advantages

1. The impeller is made of nodular forged iron or steel plate welding, and the pump physique is manufactured of steel plate, which completely makes certain the security of the impeller and the entire machine beneath a variety of severe problems, and greatly improves the service lifestyle of 2BE1 vacuum pump.

2. The shaft sleeve is produced of higher chromium stainless steel, which increases the service lifestyle of the vacuum pump by 5 moments when compared with the common substance.

3. The belt pulley (belt drive) adopts regular higher-precision taper sleeve belt pulley, which has reliable operation, practical disassembly and lengthier services life of the belt.

4. The coupling (immediate drive) adopts standard substantial-energy elastic coupling, and the elastic components are created of polyurethane, which can function stably and reliably and prolong the provider lifestyle of the gear.

five. The bearings are imported bearings and the very best bearings in China, which make sure the exact positioning of the impeller of 2BE1 vacuum pump and higher balance for the duration of operation, minimal vibration and minimal sounds, and guarantee the prolonged-phrase stable procedure of the vacuum pump.

6. Mechanical seals (optional components) are the ideal imported and domestic goods, which entirely make certain that the vacuum pump has no leakage in the course of long-term procedure and give the ideal promise for the steady operation of the vacuum pump.

7. Linear cavity design and style ensures the best pumping impact.

8. The unique best mounted gas-h2o separator saves area, can make installation more convenient, and effectively decreases sound.

Merchandise Parameters

In depth Pictures

Common Supervisor Speech

Deeply cultivate the vacuum engineering, and investigation,create and manufacture the vacuum tools to give the greatest remedy in the vacuum discipline and make the vacuum application less complicated.

Company Profile

ZheJiang Kaien Vacuum Engineering Co., Ltd. is a higher-tech company integrating R & D, manufacturing and operation of vacuum equipment. The company has robust specialized drive, superb tools and thoughtful soon after-revenue services. The merchandise producing procedure is managed in strict accordance with IS09001 high quality system. It mostly generates and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, water ring vacuum pump, vacuum device and other vacuum techniques.

 New plant plHangZhou

The firm’s merchandise have been for a variety of foodstuff, medicine, refrigeration, drying crops and a variety of transformer connected tools makers for vacuum equipment. The goods are broadly used in vacuum drying and dehydration, kerosene vapor section drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum focus, oil and gasoline recovery, and many others.

Large precision machining products

The organization cooperates with a lot of scientific analysis establishments and universities, this sort of as ZheJiang College, China College of petroleum, ZheJiang Institute of mechanical design, etc.with colleges and universities to research and develop main systems, and owns dozens of unbiased mental residence patents.Our engineering is foremost, the item quality is steady, the product has a great track record in China’s domestic marketplace, is offered all over the place, and is exported to Europe, America, Africa, the Middle East and Southeast Asia,We adhering to the basic tenet of top quality, reputation and provider, the company normally takes foremost-edge technology of vacuum pump as its personal accountability, and wholeheartedly serves consumers of vacuum products application in different industries with rigorous operating mindset and expert doing work type.

   Item good quality wins buyer cooperation

In cargo

ISO 9001

Substantial tech company certification

  Welcome to send out your requirements, we will give you with the very best services,

offer the greatest assist!!!

###

###

###

###

###

###

Choosing the Right Chain Sprocket For Your Bike

When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.

Roller chain sprocket

A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.

Gap-tooth sprocket

A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.

Steel split sprocket

Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.

Double-duty sprocket

If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.

editor by czh2022-11-29